Discover tags

This also includes the setup for a snowball factory if playing with XyCraft Machines mod. Materials needed: 1x Sink (or any water source), 1x Extractor (or any biofuel material source), 1x Crushing factory, 1x Electrolytic Separator, 2x Pressurized Reaction Chamber, 1x Rotary Condensentrator, 1x Enriching Factory, 1x ME Interface (or any output form), 2x Pressurized Tube, 1x Chemical Tank. If using the Extractor block for the biofuel source, you'll also need 4x Moss Block, 1x Stone Block, 1x Bone Block, the stone block is placed above the extractor (or below the bone block, which should be placed looking at the bottom or top). You can ignore the "snowman" on the setup, or if you need snowballs you can use the opportunity to copy it 😀 Machines are set to input items from TOP and output to BOTTOM, the exception is PRC2, which is set to input from FRONT. Electrolytic Separator is set to output (1) to TOP and output (2) to BOTTOM and also marked as dumping excess for both. PRC1 chemical config is OUTPUT TOP, INPUT FRONT, and OUTPUT BOTTOM, the chemical tank above it is set to dumping on excess. PRC2 chemical config is DISABLED TOP, INPUT FRONT AND BOTTOM, OUTPUT RIGHT, I don't think this is ultra necessary, but I just want to make sure.

This is a basic setup to automate HDPE Sheet production. You'll need: 1 Enrichment Chamber, 2 Pressurized Reaction Chamber, 1 Crusher, 1 Eletrolytic Separator, 1 Rotary Condensentrator, 1 Water source from any sort. In image #1, you can see both input and output chests where you'll need to insert any biomass item to start the system, such as a melon, and on the other end, the system will output the HDPE Sheets. Make sure you set the correct sides on the machines (Energy Cube included), matching the code's input/output directions, e.g, image #3; also make sure you dump excess chemicals in the Electrolytic Separator. PS: You can use any water source, like Mekanism's pump. I just happened to use Cooking for Blockheads' Sink.