Mekanism HDPE Sheet Factory Updated

This also includes the setup for a snowball factory if playing with XyCraft Machines mod. Materials needed: 1x Sink (or any water source), 1x Extractor (or any biofuel material source), 1x Crushing factory, 1x Electrolytic Separator, 2x Pressurized Reaction Chamber, 1x Rotary Condensentrator, 1x Enriching Factory, 1x ME Interface (or any output form), 2x Pressurized Tube, 1x Chemical Tank. If using the Extractor block for the biofuel source, you'll also need 4x Moss Block, 1x Stone Block, 1x Bone Block, the stone block is placed above the extractor (or below the bone block, which should be placed looking at the bottom or top). You can ignore the "snowman" on the setup, or if you need snowballs you can use the opportunity to copy it 😀 Machines are set to input items from TOP and output to BOTTOM, the exception is PRC2, which is set to input from FRONT. Electrolytic Separator is set to output (1) to TOP and output (2) to BOTTOM and also marked as dumping excess for both. PRC1 chemical config is OUTPUT TOP, INPUT FRONT, and OUTPUT BOTTOM, the chemical tank above it is set to dumping on excess. PRC2 chemical config is DISABLED TOP, INPUT FRONT AND BOTTOM, OUTPUT RIGHT, I don't think this is ultra necessary, but I just want to make sure.