Shared posts

This code helps you automate all of the Enchanting Apparatus Crafting from the Ars Nouveau mod. This hasn't been broadly tested, so if you encounter any problems with any sort of recipe, let me know in the comments. The deal is to input all items from almost all slots of the input chest to the pedestals and only items from the first slot to the apparatus. This works nicely with Applied Energistics 2 Pattern Provider recipes as they'll always include the main item on the first slot (slot 0). I've used two "every N ticks do" blocks to make sure the recipe starts instantly, otherwise the SFM would send the materials to the pedestals in the first second, and only a second after that send the materials to the apparatus, which isn't very efficient. With the current code, both are sent together as a single operation. This is especially helpful if you're bulk crafting; saving a small amount of time can add up very quickly if you repeat the savings for a lot of recipes. You can also try the design from the last 2 images, where I've also automated the source jar using an ME Source Jar from Ars Énergistique

This farm requires Ars Nouveau and Mob Grinding Utils to work, Apotheosis is optional, but a great addition. This design and code were taken/inspired by the linked video below. As shown in figure #2, this farm has most of the mob drops from the modpack, and as shown in figure #4, you can also include up to 3 custom spawners inside of it. I've also included toggles to switch to farming the spawners' mobs, turn off the farm, turn off fast mode (lever at the bottom in figure #3), and turn off the killing chamber and the fan above it. The fan is necessary so the mobs are killed faster, as they need to touch the mob mashers. Just Dire Things was used to collect both items and XP, then we separate the junk and salvageable items using SFM, also producing Apotheosis' gem dusts. The method involves using a Rotten Egg from Mob Grinding Utils on a 5x5 dirt platform (if uncovered, the sun will burn the soil). Then we surround the area in a square with Ars Nouveau's Sourcestone, creating the killing chamber. We use a Warp Scroll right above the killing point, binding the scroll to that position, then throwing the scroll into the Sourcestone square with a filled Source Jar near it to complete the ritual. A portal will be placed on that square, linking to the killing chamber, anything that spawns from the Rotten Egg soil will instantly be teleported to the killing chamber. I've also used a Vitalik Generator to get Source into my system using Ars Énergistique. The fast mode works by sending quick redstone signals to the Rotten Egg soil (that's what the clock is for).

This automation helps you produce a whole lot of Latex from the Industrial Foregoing mod. It produces plastic sheets and the latex fluid. The plastic sheets are sent to the system along with the latex fluid, so to store the latex fluid I'd recommend using a fluid storage cell, but you can easily change the code to send it to, sa,y a fluid tank. You will need a block placer to automate this factory; without it, you won't be able to replace the used-up logs. By the way, I'm using acacia because it's most cost-effective, as it produces more with a single log block, but you can use any type of wood. You'll also need a furnace that uses energy, or change the code to use something else if you have a different plan. I'm also using Botany Pots to feed the block placer with logs, but you may also change that to whatever you have. Lastly, as noted on the code, if and only if you change the amounts of liquid transferred to the machines, the production won't be enough to sustain the machines and to send some of it to the system to be stored (and perhaps be used on your Dissolution Chamber setup), so be advised.

The main goal of this build is to automate the crafting of the Applied Flux Redstone Crystal, just because this is a build I made in survival, and I found no other reason to automate other Crystal Assembler recipes other than this one, but feel free to automate anything using the same code pattern shown here. The recipe is doubled, so if you're automating using a pattern provider, be sure to multiply the resource amount by how many times you think it is reasonable. We're using a strategy where if we split the total amount we want to craft into multiple machines (still following the minimal resources needed for each recipe), we'll finish the crafting faster than one single machine with a bunch of resources. Just know that there is probably a sweet spot where you may send more than one recipe resource to a single machine to make it still busy until the next input feeding cycle starts, and that an amount over that will make the crafting less efficient by not utilizing as many machines as possible.

This also includes the setup for a snowball factory if playing with XyCraft Machines mod. Materials needed: 1x Sink (or any water source), 1x Extractor (or any biofuel material source), 1x Crushing factory, 1x Electrolytic Separator, 2x Pressurized Reaction Chamber, 1x Rotary Condensentrator, 1x Enriching Factory, 1x ME Interface (or any output form), 2x Pressurized Tube, 1x Chemical Tank. If using the Extractor block for the biofuel source, you'll also need 4x Moss Block, 1x Stone Block, 1x Bone Block, the stone block is placed above the extractor (or below the bone block, which should be placed looking at the bottom or top). You can ignore the "snowman" on the setup, or if you need snowballs you can use the opportunity to copy it 😀 Machines are set to input items from TOP and output to BOTTOM, the exception is PRC2, which is set to input from FRONT. Electrolytic Separator is set to output (1) to TOP and output (2) to BOTTOM and also marked as dumping excess for both. PRC1 chemical config is OUTPUT TOP, INPUT FRONT, and OUTPUT BOTTOM, the chemical tank above it is set to dumping on excess. PRC2 chemical config is DISABLED TOP, INPUT FRONT AND BOTTOM, OUTPUT RIGHT, I don't think this is ultra necessary, but I just want to make sure.

This is a dead-simple Snow Ball farm using XyCraft Extractors. All you need to do is set up the "Snowman" above the extractors and connect the cables. Note that the extractors only output to the opposite face of the block where it's placed (it's pretty damn intuitive which block face is the "beak"). The whole build idea is honestly more about exploring some resource generation that can take advantage of SFM to create an expandable farm that you can just connect to more generators, rather than really the code being complex and hard to come up with.